
Brightside Streamer
Jorge Delgadillo built this small white streamer from two ideas: a balanced leech his brother showed him, with a silver bead, pale flashy dubbing and an orange spot behind the bead, and the offset-bead Half Wit style that Lance Egan introduced. He ties it small for Euro nymphing, mostly on size 12 hooks. It has been productive dead drifted, jigged and stripped. The tail is a micro rabbit strip and the body is a dubbing loop of pearl streamer dub. It is a simple tie that suits newer tyers, and the colors are open to variation. Tied here on a size 12 hook.
Ready to tie this?
This pattern needs 6 materials. Sign up free to check which ones you already own.
Materials
Fulling Mill 5045 Jig Force Barbless hook, size 12 (or Umpqua XC400BL-BN)
12
Semperfli Classic Waxed Thread 8/0, white (or Danville Flat Waxed Nylon 70 denier, white)
White · 8/0
Fulling Mill Tactical Tungsten Drop Bead, silver, 4.0mm (or Insta Jig Tungsten Head, nickel, 5/32 inch)
Silver · 4.0mm
Fulling Mill Micro Rabbit Zonker Strips, white (or Micro Rabbit Strips, white)
White
Fulling Mill Voodoo Streamer Dub, white pearl (or MFC Arizona Simi Seal, crystal)
White pearl
Fulling Mill Seal X, fl. sunburst orange, for the hot spot behind the bead (or STS Trilobal Dubbing, fl. orange)
Fl. sunburst orange
How to Tie the Brightside Streamer
- 1
Step 1
Slide the tungsten drop bead onto the hook and seat it behind the eye.
- 2
Step 2
Start the thread behind the bead and lay a base along the shank toward the bend.
- 3
Step 3
Cut a length of micro rabbit strip for the tail. Lay the hide on top of the shank with the hair running back past the bend.
- 4
Step 4
Bind the hide down along the shank with firm thread wraps and trim any excess.
- 5
Step 5
Form a dubbing loop toward the back of the shank, then bring the working thread forward to just behind the bead.
- 6
Step 6
Spread pinches of Voodoo Streamer Dub along the loop. Add the orange Seal X at the far end of the loop.
The far end of the loop goes on last, so the orange lands right behind the bead as a hot spot.
- 7
Step 7
Spin the loop tight with a dubbing spinner to form a shaggy rope.
- 8
Step 8
Wrap the rope forward to the bead, stroking the fibers back with each turn. Tie it off and trim the excess.
- 9
Step 9
Whip finish behind the bead and trim the thread.
- 10
Step 10
Pick out and brush the body, then stroke the fibers back over the tail.
Watch Tying Tutorial
https://www.youtube.com/watch?v=B2C6aUN9bHU
Credit: Jorge Delgadillo / Fly Fish Food