
Chimera
Curtis Fry calls the Chimera a shape shifter. He wanted one pattern he could tie in many sizes and colors to imitate a wide range of insects, more like a general attractor but with trigger points borrowed from different bugs. Part of the appeal is efficiency at the vise, since one pattern covers a lot of ground. One October on lakes in the hills, it outfished the other patterns he tried for Brook Trout. This black version has a bright orange bead and a pink stripe. Tied here on a size 10 hook.
Ready to tie this?
This pattern needs 10 materials. Sign up free to check which ones you already own.
Materials
Fulling Mill FM5115 Heavyweight Grub Barbless hook, black nickel, size 10
Black Nickel · 10
Plummeting Tungsten Beads, fluorescent orange, 3/32" (2.3mm)
Fluorescent Orange · 3/32" (2.3mm)
Melted monofilament, 50 lb
50 lb
UTC Ultra Wire, silver, small
Silver · Small
Thin Skin, black, for the overbody and the thorax cover
Black
Hareline Ice Dub, UV black, for the abdomen and thorax
UV Black
Loon UV Clear Fly Finish - Flow, for the top of the thorax
How to Tie the Chimera
- 1
Step 1
Slide the orange bead onto the hook and leave it back toward the bend for now. Melt both ends of a short piece of mono to form the eyes.
- 2
Step 2
Start the black thread behind the hook eye, tie the mono eyes in with crossing wraps, and tie off.
- 3
Step 3
Slide the bead forward against the eyes. Restart the thread behind the bead and wrap a base back to the bend.
- 4
Step 4
Tie in the silver wire at the bend, trailing behind the hook, then tie in a small bunch of black pheasant tail fibers at the same point for the tail.
- 5
Step 5
Tie in a strip of black Thin Skin at the bend, trailing behind the hook, then wrap the thread forward in a smooth layer.
- 6
Step 6
Dub the thread with the UV black Ice Dub and wrap the abdomen forward from the bend.
- 7
Step 7
Pull the Thin Skin forward over the top of the abdomen, tie it down at the front of the abdomen, and trim it.
- 8
Step 8
Wrap the wire forward in open turns over the Thin Skin, tie it off, and trim the excess.
- 9
Step 9
Tie in the pink tinsel and a second strip of black Thin Skin at the front of the abdomen so both trail back over the body.
- 10
Step 10
Dub more UV black Ice Dub onto the thread and wrap a full, shaggy thorax up to the bead.
- 11
Step 11
Pull the Thin Skin forward over the top of the thorax and tie it down behind the bead.
- 12
Step 12
Bring the pink tinsel forward along the center of the Thin Skin and tie it down at the same point. Trim the tinsel and the Thin Skin, then whip finish behind the bead.
- 13
Step 13
Brush out the thorax dubbing so it stands away from the sides and underside of the fly.
- 14
Step 14
Coat the top of the thorax with the UV resin and cure it.
Watch Tying Tutorial
https://www.youtube.com/watch?v=c1NeosUdTR8
Credit: Curtis Fry / Fly Fish Food