
El Crawcito
Cheech of Fly Fish Food built this crawfish on the chassis of his El Sculpito, aiming for a fly that behaves like a weedless bass jig with a trailer. It settles into place, and at rest the rubber legs flare while the rabbit claws stay raised in a defensive pose. A bead and a barbell work together as a two-part weight system, so it can be tied as a slow-falling finesse craw or a heavy, quick one. Fish it along the bottom for largemouth and smallmouth. Tied here on a size 1/0 hook.
Ready to tie this?
This pattern needs 14 materials. Sign up free to check which ones you already own.
Materials
Super glue, for the barbell and the weed guard wraps
Senyo's Barred Predator Wrap, barred UV, for the antennae
Barred UV
Black Barred Rabbit Strips, crawfish orange, for the claws
Crawfish Orange
Arizona Simi Seal, crawdad
Crawdad
Loco Legs, pumpkin
Pumpkin
UV resin, for the head
How to Tie the El Crawcito
- 1
Step 1
Slide the black nickel tungsten bead up to the eye and mount the hook in the vise.
- 2
Step 2
Start the thread behind the bead and tie on the lead barbell eyes with firm figure-eight wraps. Add a drop of super glue to lock them in place.
- 3
Step 3
Wrap the orange thread back over the shank to the bend.
- 4
Step 4
Tie in strands of Buggy Nymph Legs at the bend so they trail behind the hook for antennae.
- 5
Step 5
Tie in a small bunch of Barred Predator Wrap at the same point, with the fibers lying along the antennae. Build a small bump of orange thread in front of them as a hot spot.
- 6
Step 6
Cut two pieces of the rabbit strip and tie one on each side of the bend, so they spread apart in a V for the claws.
- 7
Step 7
Tie in the Palmer Chenille in front of the claws, wrap it forward a short way and tie it off.
- 8
Step 8
Tie an epoxy mono eye to each side of the shank in front of the chenille, with the eyes reaching back toward the claws.
To build your own eyes, melt a ball on the end of a piece of mono, dip it in black-tinted UV resin and cure it, then dip it in clear UV resin and cure it again.
- 9
Step 9
Tie in a length of the wire or stiff mono just ahead of the eyes for the weed guard and leave the long end free. Add a drop of super glue to the wraps.
- 10
Step 10
Form a dubbing loop, spin the Simi Seal into a shaggy rope and wrap it forward, stroking the fibers back as you go.
- 11
Step 11
Tie in Loco Legs on each side of the body so they flare out. Use a clip to hold the legs and body fibers back out of the way.
- 12
Step 12
Spin more Simi Seal in a dubbing loop and wrap it in front of the legs and around the barbell to form the head, then remove the clip and stroke everything back.
- 13
Step 13
Bring the long end forward to form a weed guard loop that stands in front of the hook point, and secure it behind the eye. Whip finish and trim the excess.
- 14
Step 14
Coat the wraps at the head with UV resin and cure it.
Watch Tying Tutorial
https://www.youtube.com/watch?v=ooNsDCYPZaY
Credit: Cheech / Fly Fish Food