
Foam Face Minnow
Ben of Fly Fish Food worked out this gurgler variation after a large foam fly drew cutthroat trout on a skunked tiger muskie trip. It imitates a minnow rising to the surface to feed. Fish it on a floating line, or on a sink tip, where a hard strip pulls it under and the foam head lifts it back up on the pause. Craft Fur, EP Fibers and Finesse Body Chenille form a light hollow body with a lead keel. It has taken trout and bass. Tied here on a size 1/0 hook.
Ready to tie this?
This pattern needs 17 materials. Sign up free to check which ones you already own.
Materials
Gamakatsu SC15 Wide Gap Saltwater hook, size 1/0 (or Ahrex 280 Saltwater Minnow hook)
1/0
UTC Ultrathread 210 Denier, white (or Danville Flymaster Plus 210 denier)
White · 210 denier
Lead wire, 0.02 (or lead free round wire), for the keel
0.02
Hareline Extra Select Craft Fur, medium gray dun (or Salty Craft Fur, grey)
Medium Gray Dun
Hareline Extra Select Craft Fur, medium olive (or Salty Craft Fur, olive)
Medium Olive
Hedron Flashabou, pink 6918 (or Mirage Flashabou 3065, pink)
Pink
Chocklett's Finesse Body Chenille Medium, 3/4", clear, for the underbody (or Chocklett's Clear Glass Minnow Chenille)
Clear · 3/4"
Olive marker, to color the top of the chenille
Olive
EP Fibers, gray (or MFC Widow's Web, smoke)
Gray
EP Fibers, olive (or MFC Widow's Web, olive)
Olive
Fly Tyer's Z-Ment, to bond the foam
Fulling Mill Epoxy Eye, super pearl, 6.0mm (or 3D holographic eyes, 5/32")
Super Pearl · 6.0mm
Loctite Gel Control Super Glue, for the eyes
Loon UV Clear Fly Finish Thick 1/2 oz, for the head
Black marker, for spots
Black
How to Tie the Foam Face Minnow
- 1
Step 1
Set the hook in the vise and wrap a short section of lead wire on the rear half of the shank to act as a keel. Add a little glue to lock it, then start the thread and bind the wire in place.
- 2
Step 2
Tie in a long bunch of gray Craft Fur on top of the shank at the front of the keel so it trails well past the bend. Trim the butts.
- 3
Step 3
Tie in a bunch of medium olive Craft Fur on top of the gray in the same spot.
- 4
Step 4
Add a few strands of pink Flashabou along each side so they lie between the two colors.
- 5
Step 5
Tie in the clear Finesse Body Chenille in front of the Craft Fur and wrap it forward in close turns to bulk up the underbody. Tie it off and trim.
- 6
Step 6
Stroke the chenille fibers out. If you want the back to match the Craft Fur, color the top half with an olive marker.
- 7
Step 7
Tie in gray EP Fibers on the belly side with the fibers pointing forward past the eye. Keep the bunch sparse and even.
- 8
Step 8
Tie in olive EP Fibers on top the same way, pointing forward.
- 9
Step 9
Fold both colors back over the body and make thread wraps in front of them to hold them in place, forming a hollow baitfish shape.
- 10
Step 10
Cut one strip each of gray and olive foam. Coat them with Z-Ment, press them together, let them bond, and trim one end down to a narrow tie-in point.
- 11
Step 11
Tie in the narrow end of the foam on the shank behind the eye with the wide end reaching forward past the eye. Keep the olive side on top and leave the foam lip angled up and forward.
- 12
Step 12
Build a neat thread band at the base of the foam and whip finish.
- 13
Step 13
Glue an epoxy eye to each side of the thread band with super glue, then coat the band and eyes with UV resin and cure it.
- 14
Step 14
If you want a mottled look, add black spots to the foam and body with a marker.
Watch Tying Tutorial
https://www.youtube.com/watch?v=UrWSEvCkWyY
Credit: Ben / Fly Fish Food