
Foam is Home Stonefly
Foam is Home Stonefly is a Tim Sickles tie, featured by Fly Fish Food, from a tyer known for very neat foam bugs. Thin cinnamon foam makes a segmented body, tan foam and cow elk stack into a low wing, and a folded foam head with rubber legs finishes the adult stonefly shape. The colors can be changed to suit whichever insect you need to imitate. Fish it on the surface as you would any large foam dry. Tied here on a size 8 hook.
Ready to tie this?
This pattern needs 9 materials. Sign up free to check which ones you already own.
Materials
Speckled Centipede Legs, speckled tan/brown, medium
Speckled tan/brown · Medium
Rainy's Cross-Link Sheet Foam, cinnamon, 1mm
Cinnamon · 1mm
Rainy's Cross-Link Sheet Foam, tan, 1mm, for the underwing
Tan · 1mm
Nature's Spirit Select Cow Elk, natural
Natural
Rainy's Cross-Link Sheet Foam, cinnamon, 2mm
Cinnamon · 2mm
Round Rubber Legs, brown, medium
Brown · Medium
Fly Tyer's Z-Ment, for the finish
How to Tie the Foam is Home Stonefly
- 1
Step 1
Clamp the hook in the vise, start the thread behind the eye and build a thin base back to the bend.
- 2
Step 2
Tie in two centipede legs at the bend so they split into a tail behind the hook. Bind the butts along the shank and trim them.
- 3
Step 3
Cut a narrow strip of 1mm cinnamon foam and tie it in at the rear of the shank.
- 4
Step 4
Work the foam strip forward in even segments, using the thread to define each one, and stop short of the eye. Tie off the foam and trim the excess.
- 5
Step 5
Tie a strip of 1mm tan foam on top at the front of the body so it runs back over the body as an underwing. Trim the front end.
- 6
Step 6
Clean a bunch of cow elk and even the tips in a hair stacker.
- 7
Step 7
Tie the elk on top of the tan foam at the front of the body with the tips reaching back past the bend. Trim the butts.
- 8
Step 8
Cut a head piece from 2mm cinnamon foam and trim it into a fork with two arms. Tie the joined end on at the front of the wing so one arm reaches forward above the eye and the other below it.
A size 10 hopper, caddis and ant foam body cutter gives a clean shape, or trim the foam with scissors.
- 9
Step 9
Fold both arms back around the eye and bind them down to form a blocky head. Leave a short flap over the base of the wing and trim the lower arm.
- 10
Step 10
Tie a length of brown round rubber along each side at the thread band behind the head, so each side has a front and a rear leg.
- 11
Step 11
Trim the legs to length. Whip finish and add a small drop of Z-Ment to the wraps.
Watch Tying Tutorial
https://www.youtube.com/watch?v=lyuhKzkIapU
Credit: Tim Sickles / Fly Fish Food