
Ginger Minner
Ginger Minner is a baitfish pattern from Clark "Cheech" Pierce, scaled up from the Baby Fat Minnow. Going bigger changes the build, with extra marabou, a reworked body and a different head. Ginger marabou and UV tan Ice Dub give a soft, slightly translucent profile, and a Bruiser Blend head shaded with markers and hardened with UV resin carries the eyes. Its first trials were in Argentina, where perca and brown trout took it eagerly. Fish it wherever trout or perch feed on small baitfish. Tied here on a size 4 hook.
Ready to tie this?
This pattern needs 14 materials. Sign up free to check which ones you already own.
Materials
Firehole Stones plated tungsten bead, gold, 4.0mm (5/32 inch)
Gold · 4.0mm
Chartpak fly tying marker, Goldenrod, for shading the head
Goldenrod
Chartpak fly tying marker, Sepia (medium brown), for shading the head
Sepia
Chartpak fly tying marker, Delta Brown (dark brown), for shading the head
Delta Brown
Gulf Resin
Loon UV Clear Fly Finish, Thick (1/2 oz)
Loon UV Clear Fly Finish, Flow
How to Tie the Ginger Minner
- 1
Step 1
Slide the gold tungsten bead onto the hook, seat it behind the eye and mount the hook in the vise.
- 2
Step 2
Start the white thread behind the bead, trim the tag and lay a thread base toward the rear of the shank.
- 3
Step 3
Tie in a bunch of ginger marabou on top at the rear of the shank to start the tail. Add more marabou in further bunches until the tail is full.
- 4
Step 4
Bind the marabou butts down along the shank and trim any excess.
- 5
Step 5
Dub the UV tan Ice Dub over the shank from the tail forward, stopping just behind the bead.
- 6
Step 6
Stroke the Ice Dub fibers rearward with your fingers so the sparkle blends into the marabou.
- 7
Step 7
Pull a clump of Butter Belly Bruiser Blend and tie it in just behind the bead on top of the shank, with the fibers reaching forward past the hook eye.
- 8
Step 8
Rotate the vise and tie a clump of Pale Lemon Bruiser Blend on the underside the same way, so the fly has a forward-facing clump above and below the shank.
- 9
Step 9
Fold both clumps back over the bead and bind them down behind it to form a smooth, rounded head. Trim any stray fibers.
- 10
Step 10
Whip finish behind the head and cut the thread.
- 11
Step 11
Shade the head with the markers, starting with Goldenrod and working to the darker colors. Add Sepia along the upper sides and Delta Brown along the back.
- 12
Step 12
Put a small amount of UV resin on each side of the head, press on an eye and cure it with a UV light.
- 13
Step 13
Coat the head and eyes with UV resin, working it around the eyes with a bodkin, then cure.
- 14
Step 14
Add further thin coats, curing each one, until the head is smooth and hard.
Watch Tying Tutorial
https://www.youtube.com/watch?v=6xaZDjw3U54
Credit: Cheech / Fly Fish Food