Glitter Minnow

Glitter Minnow

Streamer
Baitfish
Intermediate
Rainbow Trout
Brown Trout
Smallmouth Bass
Largemouth Bass
Hook: 2-6

Cheech of Fly Fish Food built the Glitter Minnow as a cross between a Sparkle Minnow and a Kreelex. A dubbing loop body of Ripple Ice Dub sits between a Shimmerbou tail and a wing of Kreelex Fish Flash, all pushed by a tungsten cone. Shimmerbou swims more freely than ordinary Krystal Flash and comes in plenty of colors, so the fly is easy to change. Adjust the sink rate with more lead or tungsten beads on the shank. Tie it in sizes 2 to 6. Tied here on a size 2 hook.

Ready to tie this?

This pattern needs 9 materials. Sign up free to check which ones you already own.

Check My Materials — Free

Materials

Hook

TMC 5263 Hook, nymph and streamer, size 2

2

Thread

Danville Flat Waxed Nylon Thread, 140 denier, black (or UTC Ultrathread 140 denier)

Black · 140 denier

Bead

Slotted tungsten conehead, medium 6.0mm, matte black (or gold)

Matte Black · 6.0mm

Weight

Lead wire, 0.025

0.025

Tail

Hareline Shimmerbou, UV pearl #2604 (or MFC Kreelex Fish Flash, UV pearl)

UV Pearl

Tail

Hareline Shimmerbou, gold #2602, for the tail and wing (or MFC Kreelex Fish Flash, gold)

Gold

Body

Hareline Ripple Ice Dub, gold (or Ice Dub, gold)

Gold

Body

Hareline Ripple Ice Dub, mother of pearl (or Ice Dub, minnow belly)

Mother of Pearl

Wing

MFC Kreelex Fish Flash, mottled gold, for the back (or Shimmerbou, bronze #2617)

Mottled Gold

How to Tie the Glitter Minnow

  1. 1

    Step 1

    Slide the slotted cone onto the hook and set the hook in the vise.

  2. 2

    Step 2

    Make wraps of lead wire on the shank and push them forward into the back of the cone so it stays seated.

  3. 3

    Step 3

    Start the thread behind the lead and build a thread base back to the bend, locking the wire in place.

  4. 4

    Step 4

    Tie in a bunch of UV pearl Shimmerbou at the bend for the lower tail, folding it back over the thread so it trails past the hook.

  5. 5

    Step 5

    Tie in a bunch of gold Shimmerbou the same way on top of the pearl and trim the ends level at the back.

  6. 6

    Step 6

    Form a dubbing loop at the back of the shank and spread the gold and mother of pearl Ripple Ice Dub in it. Spin the loop into a brush.

    Keep the fibers loose and even in the loop so the body stays fuzzy instead of rope-like.

  7. 7

    Step 7

    Wrap the brush forward along the shank, stroking the fibers back with each turn. Tie it off short of the cone, leaving room for the collar.

  8. 8

    Step 8

    Tie a bunch of mottled gold Kreelex Fish Flash on top behind the cone by its middle, so half lies back over the body and half points forward. Tie a bunch of gold Shimmerbou on top the same way. Fold the forward halves back over the body and bind them down to form a dark back.

  9. 9

    Step 9

    Hold the wing back out of the way with a material clip.

  10. 10

    Step 10

    Build a second, shorter dubbing loop with the same Ripple Ice Dub and wrap it right behind the cone as a collar.

  11. 11

    Step 11

    Stroke the collar back, whip finish behind the cone, and remove the clip.

Watch Tying Tutorial

https://www.youtube.com/watch?v=WAuSzbgE4Ds

Credit: Cheech / Fly Fish Food

More patterns like this

Other patterns using these materials

Track Your Fly Tying Materials

See which patterns you can tie with materials you already own. Build your inventory, discover new patterns, and never buy duplicates.

Get Started — It's Free