
Mayfly Hackle Stacker
Mayfly Hackle Stacker is a slim mayfly tied by Ian Wilson that works as either an emerger or an adult dry. A thin thread body with a wire rib sits under a coat of UV resin on a curved hook. The hackle is wound around a mono loop, then the loop is drawn forward over a CDC thorax so the fibers gather on top of the fly. Change the colors and the hackle shade to match the naturals on your water. Fish it on a dead drift to rising trout. Tied here on a size 12 hook.
Ready to tie this?
This pattern needs 8 materials. Sign up free to check which ones you already own.
Materials
Danville Flat Waxed Nylon 70 denier, olive, which also forms the body
Olive · 70 denier
Whiting Coq de Leon Tailing Pack, dark dyed dun
Dark Dyed Dun
Loon UV Clear Fly Finish - Flow, for coating the body
Clear monofilament, for the hackle loop
Dry fly hackle feather, dun or light tan dun
Dun or light tan dun
Polish CDC, blue dun
Blue Dun
How to Tie the Mayfly Hackle Stacker
- 1
Step 1
Mount the hook and start the olive thread behind the eye. Lay a smooth thread base back around the curve of the hook.
- 2
Step 2
Tie in a small, sparse bunch of Coq de Leon fibers on top of the shank for the tail. Bind them back to the bend and trim the butts.
- 3
Step 3
Tie in the amber wire at the bend and let it hang behind the hook.
- 4
Step 4
Wrap the thread forward in smooth, even turns to form a slim body, stopping short of the eye to leave room for the thorax.
- 5
Step 5
Wrap the wire forward in open, even turns to rib the body. Tie it off at the front of the body and remove the excess.
- 6
Step 6
Coat the body with a thin layer of Loon UV Flow and cure it under a UV light.
- 7
Step 7
Tie a doubled length of clear mono on top of the shank at the front of the body, leaving a long loop standing above the hook.
- 8
Step 8
Tie in the hackle feather at the base of the loop, with the feather trailing back over the body.
- 9
Step 9
Wrap the hackle around the two strands of the mono loop, just above the shank. Tie off the feather at the shank and trim the excess, keeping the loop intact.
- 10
Step 10
Wax the thread and use a split thread or a dubbing loop to hold the CDC. Twist it into a soft rope.
- 11
Step 11
Wrap the CDC rope around the thorax, working around the base of the hackle. Tie it off behind the eye and trim the excess.
- 12
Step 12
Pull the mono loop forward over the thorax so the hackle gathers on top of the fly. Bind the loop down behind the eye.
- 13
Step 13
Trim the excess mono, whip finish behind the eye and cut the thread.
Watch Tying Tutorial
https://www.youtube.com/watch?v=4kdGqfOCljM
Credit: Ian Wilson / Fly Fish Food