
Scuba Steve
A trout sculpin of about three inches, tied here by AJ Jorgensen of Fly Fish Food. A broad wool head pushes water while the lead and tungsten sit toward the rear, so the fly swims with a jackknife action on the strip. That weight also keels it hook point up, which helps it travel close to the bottom on a sinking line with fewer snags. Cream marabou under olive gives a pale belly and darker back. Strip it along the bottom through runs and pools. Tied here on a size 4 hook.
Ready to tie this?
This pattern needs 9 materials. Sign up free to check which ones you already own.
Materials
Kumoto K5263B bent nymph hook, size 4 (or Umpqua U106 or Daiichi 2220)
4
Hareline Plummeting Tungsten Beads - Metallic Colors, metallic red, 7/32" (5.5mm)
Metallic Red · 7/32" (5.5mm)
Lead wire, .030
.030
Nature's Spirit Fish Hunter Premium Strung Marabou, sculpin olive, for the back of the tail
Sculpin Olive
Nature's Spirit Fish Hunter Premium Strung Marabou, fluorescent primrose cream UV, for the belly of the tail
Fl. Primrose Cream
How to Tie the Scuba Steve
- 1
Step 1
Slide the bead onto the hook and seat it at the kink in the shank, then mount the hook in the vise.
- 2
Step 2
Wrap a short section of lead wire around the shank behind the bead. Start the thread and bind over the wire to lock it in place, then take the thread to the bend.
- 3
Step 3
Tie in a bunch of sculpin olive marabou at the bend for a tail that runs well past the hook. Bind the butts down and trim any excess.
- 4
Step 4
Tie in a few strands of gold Holographic Flashabou at the same point so they lie along the tail.
- 5
Step 5
Tie in a bunch of cream marabou on top of the olive and bind it down.
Stacking the cream on top now puts it on the belly once the fly is turned over.
- 6
Step 6
Turn the hook over in the vise so the point rides up, with the olive over the cream. Work from this position for the rest of the fly.
- 7
Step 7
Form a dubbing loop at the bend, load it with Mega Simi Seal and spin it into a fuzzy rope.
- 8
Step 8
Wrap the rope forward over the wire to the bead, stroking the fibers back as you go. Tie it off and trim the excess.
- 9
Step 9
Tie in a thin bunch of Sculpin Wool on top of the shank in front of the bead so the fibers sweep back over the bead and body. Add a matching bunch underneath to form the collar.
- 10
Step 10
Keep adding small bunches of wool on top and underneath, working forward toward the eye and packing each one back, to build a full head.
- 11
Step 11
Whip finish behind the eye and cut the thread.
- 12
Step 12
Comb the wool out so the fibers blend, then trim the head to a broad teardrop that tapers back into the body.
Watch Tying Tutorial
https://www.youtube.com/watch?v=0oqkC9ObXL0
Credit: AJ Jorgensen / Fly Fish Food