
Slammin Fly
Slammin Fly is a big foam salmonfly from AJ Jorgensen at Fly Fish Food, built as his main trout dry for the fisheries of eastern Idaho. A thick segmented foam body and a poly wing give it enough float to carry a rubber legged nymph under it during salmonfly hatches. Speckled legs, floss tails and floss antennae add movement, and an orange foam indicator makes it easy to follow on the water. Fish it alone or as the top fly in a dry dropper rig. Tied here on a size 6 hook.
Ready to tie this?
This pattern needs 9 materials. Sign up free to check which ones you already own.
Materials
Danville Flat Waxed Nylon Thread, 140 denier, fluorescent orange
Fluorescent Orange · 140 denier
Fulling Mill Flex-Floss, brown, for the tails and antennae
Brown
Bug Foam 2mm, tan, for the underwing
Tan · 2mm
Speckled Centipede Legs, medium, speckled brown
Speckled Brown · Medium
Bug Foam 2mm, orange, for the indicator
Orange · 2mm
Permanent marker, for barring the wing
How to Tie the Slammin Fly
- 1
Step 1
Clamp the hook in the vise and start the thread. Build a thread base along the shank and return the thread to the middle.
- 2
Step 2
Cut a strip of 6mm brown foam long enough to run the length of the shank and past the eye. Tie it on at the middle of the shank with firm wraps, leaving the front half as a solid block for the head.
- 3
Step 3
Working back toward the bend, make evenly spaced wraps over the foam to form segments. Leave a block of foam at the rear end.
- 4
Step 4
Return the thread to the thorax. Tie in a length of brown Flex-Floss on top so the ends run back past the rear of the body for tails.
- 5
Step 5
Tie a strip of 2mm tan foam on top at the thorax so the rear portion lies back over the body as an underwing. Fold the front end back and bind it, then trim any excess.
- 6
Step 6
Tie a bunch of EP 3-D fibers on top at the same spot, running back over the tan foam. Trim the butts and the wing to length.
- 7
Step 7
Tie speckled centipede legs along each side at the thorax so they splay out from the body.
- 8
Step 8
Tie a strip of 2mm orange foam on top just ahead of the wing, with the long end free.
- 9
Step 9
Tie a second length of Flex-Floss at the head so the ends point forward for antennae.
- 10
Step 10
Fold the orange foam forward over the thorax, bind it down behind the brown foam head and trim it to a short tab.
- 11
Step 11
Whip finish and cut the thread. Trim the legs, tails and antennae to length.
- 12
Step 12
Add bars across the wing with a permanent marker, if you like.
Watch Tying Tutorial
https://www.youtube.com/watch?v=O_pXPY1LsSc
Credit: AJ Jorgensen / Fly Fish Food