
Steak Drake
Steak Drake is a Cheech design for green drake hatches, a big extended body mayfly he shelved for about ten years and came back to after trying a C&F extended body tool. The body is built on a needle from foam and olive dubbing, glued, then slid off and tied to a curved hook. A CDC wing, an olive deer hair head and an orange indicator finish it, so it floats well and stays easy to track. Fish it on the surface whenever big drakes are on the water. Tied here on a size 10 hook.
Ready to tie this?
This pattern needs 12 materials. Sign up free to check which ones you already own.
Materials
Fulling Mill FM5065 Czech Nymph Barbless hook, size 10
10
Semperfli Classic Waxed Thread 12/0, fluorescent yellow, for the body and wing
Fluorescent Yellow · 12/0
Semperfli Classic Waxed Thread 8/0, pale olive, for the deer hair head
Pale Olive · 8/0
Mayfly Tails, black
Black
Loon Water Based Head Cement System, to set the thread on the needle (or TroutHunter Superior Water Based Head Cement)
Wapsi Super Fine Dry Fly Dubbing, olive
Olive
Fly Tyer's Z-Ment, to glue the finished body
Nature's Spirit CDC, medium dun
Medium Dun
Wapsi Premo Deer Hair Strips, olive (or Nature's Spirit All-Purpose Deer Hair, olive)
Olive
Barred rubber legs
How to Tie the Steak Drake
- 1
Step 1
Clamp an extended body tool in the vise so the needle points forward from the jaws.
A C&F Designs Extended Body Tool is used here. Stonfo Detached Body Tools do the same job.
- 2
Step 2
Start the fluorescent yellow thread on the needle.
- 3
Step 3
Cut a tapered strip of speckled foam and tie it in at the tail end of the needle. Leave the rest of the strip free for now.
- 4
Step 4
Coat the thread on the needle with water based head cement.
- 5
Step 5
Dub olive dubbing along the needle to build the body.
- 6
Step 6
Bring the foam along the body and bind it with spaced thread wraps to form segments, finishing at the forward end of the body.
- 7
Step 7
Tie the black mayfly tails at the tip of the body so they extend past it.
- 8
Step 8
Coat the finished body with glue and let it set.
Do not skip this coat. It is what keeps the body together.
- 9
Step 9
Whip finish, cut the thread and slide the body off the needle.
- 10
Step 10
Put the hook in the vise and start the same thread. Lay the extended body on top of the shank with the tails trailing past the bend and bind it down at the front.
- 11
Step 11
Tie a bunch of medium dun CDC on top, just ahead of the body, with the tips running back over it. Tie off and cut the yellow thread.
- 12
Step 12
Start the pale olive thread. Clean and stack a bunch of olive deer hair and tie it on at the head with the tips pointing forward over the eye.
- 13
Step 13
Sweep the hair back to form a rounded head and bind it behind the head, so the tips flare back over the CDC.
- 14
Step 14
If you want legs, tie a strand along each side at the head wraps so the ends point both forward and back. Tie a small bunch of UV orange fibers on top at the same wraps for the indicator.
- 15
Step 15
Whip finish, cut the thread, and trim the indicator and legs to length.
Watch Tying Tutorial
https://www.youtube.com/watch?v=cnshZu7XHH4
Credit: Cheech / Fly Fish Food