
Wally Wing Callibaetis
Wally Wing Callibaetis is an adult mayfly dry tied by Curtis Fry for the lakes, reservoirs and ponds where Callibaetis hatch for long stretches. It uses the reversed-fiber teal flank wing originated by Wally Lutz, which is tougher than it looks and gives feeding fish a true mayfly outline. A turkey biot body and a CDC and beaver thorax round it out. With floatant between fish it can last a long session, and a barbless hook means less handling at release. The same wing works for other mayflies, such as PMDs, Baetis and Drakes, in the right shades. Tied here on a size 14 hook.
Ready to tie this?
This pattern needs 7 materials. Sign up free to check which ones you already own.
Materials
Fulling Mill FM5050 Ultimate Dry Fly Barbless hook, size 14
14
Danville Flat Waxed Nylon Thread, 70 denier, gray
Gray · 70 denier
Whiting Coq de Leon Tailing Pack, Badger Dyed Med Dun
Badger Dyed Med Dun
Polish CDC, blue dun, for the under-wing, spun in a thread loop
Blue Dun
How to Tie the Wally Wing Callibaetis
- 1
Step 1
Mount the hook and start the gray thread a little behind the eye.
- 2
Step 2
Hold a teal flank feather by the tip and stroke a section of its fibers back against the grain along the stem, so they stand reversed and bunch into a wing shape.
- 3
Step 3
Tie the prepared feather on top of the shank at the wing position, leaving room ahead of it for the thorax, with the feather reaching forward over the eye. Bind it down firmly and trim the butt.
- 4
Step 4
Wrap back to the bend and tie in a few Coq de Leon fibers, so they flare apart into split tails. Trim the excess.
- 5
Step 5
Tie in a turkey biot at the bend and bring the thread forward to the wing.
- 6
Step 6
Grip the biot with hackle pliers and wrap it forward in touching turns to build a segmented body. Tie it off behind the wing and trim the excess.
- 7
Step 7
Lift the feather upright and take thread wraps tight against its front so the wing stands on its own.
- 8
Step 8
Stack CDC feathers in a CDC clamp and cut away the stems, so the clamp holds a neat row of fibers.
- 9
Step 9
Form a thread loop at the wing base, lay the CDC fibers into it and release the clamp. Spin the loop with a dubbing twister to lock the fibers into a fuzzy rope.
- 10
Step 10
Wrap the CDC rope around the thorax, behind and ahead of the wing. Tie it off and trim the excess.
- 11
Step 11
Dub a thin noodle of beaver onto the thread and wrap it through the thorax, finishing behind the eye.
- 12
Step 12
Whip finish behind the eye, cut the thread, and clip any stray CDC fibers that are too long.
- 13
Step 13
Stroke the reversed teal fibers back down toward the shank so they fan into a wing, then remove the leftover feather tip above them. Only the barred wing fibers should stay on the fly.
Watch Tying Tutorial
https://www.youtube.com/watch?v=Yp85XKSr_-k
Credit: Curtis Fry / Fly Fish Food