
Zeph's Water Boatman
Curtis Fry put together Zeph's Water Boatman for his stillwater box after samples from trout and tips from a friend showed him how much these insects can matter to fish on the prowl. He based it on the insects he was finding. A shiny Ice Dub body sits under a black Thin Skin shellback, rootbeer Midge Flash makes the legs, and Loon UV finish coats the back. It is a fairly simple tie and fun to fish. Tied here on a size 12 hook.
Ready to tie this?
This pattern needs 6 materials. Sign up free to check which ones you already own.
Materials
Fulling Mill FM5005 Heavyweight Champ Barbless, size 12
12
Thin Skin, black, for the shellback
Black
Hare'e Ice Dub, hare's ear (or Ice Dub, UV tan)
Hare's Ear
Midge Flash, rootbeer
Rootbeer
Loon Fluorescing UV Clear Fly Finish, for the shellback and rear legs
How to Tie the Zeph's Water Boatman
- 1
Step 1
Start the thread behind the eye and wrap back to the bend.
- 2
Step 2
Tie in a strip of black Thin Skin on top of the shank at the bend, leaving the long end trailing to the rear.
- 3
Step 3
Dub the Ice Dub onto the thread and build a short, plump body, stopping behind the eye.
- 4
Step 4
Tie in strands of rootbeer Midge Flash on each side of the shank just behind the eye, leaving the rear pair long.
- 5
Step 5
Pull the Thin Skin forward over the back of the body. Tie it down behind the eye and trim the excess.
- 6
Step 6
Whip finish behind the eye and cut the thread.
- 7
Step 7
Hold a rear leg out straight, add a little Loon UV finish along it and cure it with a UV light so it stays stiff. Repeat on the other rear leg, using a toothpick to spread the finish.
- 8
Step 8
Trim the legs to length.
- 9
Step 9
Coat the shellback with Loon UV finish, spread it with a toothpick so the back is smooth, and cure it.
Watch Tying Tutorial
https://www.youtube.com/watch?v=hR1PV7fQ6VQ
Credit: Curtis Fry / Fly Fish Food